{"product_id":"b2bfab-axle-spacer-kit-for-mk4-5-6-7-w-108mm-axles","title":"B2BFAB 108mm Axle Spacer Kit, For VW Mk7 | Mk6 | Mk5 |Mk4, One Kit Per Side","description":"\u003ch3\u003e\n\u003cstrong\u003eThis kit works with all 108mm flanged MK4\/5\/6\/7 manual or DSG vehicles in need of improved geometry from lifting or aggressive lowering. \u003c\/strong\u003e\u003cstrong\u003e*One kit per side\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eOriginally designed for the Mk7 Alltrack. This spacer kit has proven to be an affordable and effective way to correct for the axle geometry when lifting or aggressive lowering for all 108mm axle equipped vehicles \u003c\/p\u003e\n\u003cp\u003eOur kit includes full color install instructions and can be done without removal of the entire axle, thus making for a very straightforward install, especially during the lift kit install process,\u003c\/p\u003e\n\u003cp\u003ePlease note - If your axle is damaged or past it's mechanical limits, noise, binding, or vibration could still be a concern. At this point we suggest axle replacement. For any 2018 up Mk7 vehicles requiring axle replacement we recommend longer driver side axle which was used in quite a few VW models including but not limited to Prefacelift (2017) Alltrack and 4 Motion Golf Sportwagen as well as 2015 to 2018 GTI, GLI, etc. The OEM part number for the longer unit is 5QM407271E. We keep a stock of these axles in good used condition on hand at all times. Please contact us if interested in purchasing one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMk7, Mk6, and Mk5\u003c\/span\u003e with ball and cage inner joints call for the \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e60mm \u003c\/span\u003ebolts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMk4 \u003c\/span\u003etripod style axle joint call for the \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e30mm \u003c\/span\u003ebolts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e*Does not fit Mk5\/6\/7 DSG TDI vehicles. Click \u003ca href=\"https:\/\/www.b2bfab.com\/products\/b2bfab-axle-spacer-kit-for-mk5-6-7-tdi?_pos=2\u0026amp;_sid=0efd44784\u0026amp;_ss=r\" target=\"_blank\"\u003ehere \u003c\/a\u003efor that version.\u003c\/p\u003e\n\u003cp\u003e*Does not fit Mk4\/5\/6\/7 equipped with 100mm axle flanges. \u003cspan\u003eClick \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/www.b2bfab.com\/products\/b2bfab-axle-spacer-kit-for-mk4-5-6-7-w-100mm-axles\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e \u003cspan\u003efor that version.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAxle Spacer Measuring Guide\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe outside diameter of the inner axle joint is the dimension listed for our axle spacers (100mm, 108mm, 119mm, 123mm). To determine this measurement, first look to see if your inner joint is cylindrical or if it has a 6-point star shape. If cylindrical, you either have a 100mm or a 108mm. If star-shaped, you either have a 119mm or a 123mm.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWith the axles installed in the vehicle:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo determine the diameter of your cylindrical inner CV joint (again 100mm or 108mm) we suggest the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eUsing a piece of non-stretchable string or wire, wrap it around the inner CV joint where the joint mates with the flange. Mark the string where it meets itself. Measure between your marks with the string\/wire laid out straight on a table. This will provide you with the circumference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e100mm axle joint circumference: 314.16mm or 12.36”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e108mm axle joint circumference: 339.29mm or 13.36”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe same can be done for star shaped inner CVs however the measurement is less accurate because the joint is not cylindrical and your measurement may be up to ¼” less than the circumferences listed below. Circumferences for these axle joints would be as follows:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e119mm axle joint circumference: 373.85mm or 14.72”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e123mm axle joint circumference: 386.42mm or 15.21”\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWith the axles removed from the vehicle:\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasuring the diameter of the end of the axle joint (across the end of the joint with a tape measure would result in the following measurements:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e100mm or 3.94”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e108mm or 4.25”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e119mm or 4.67”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e123mm or 4.84”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLastly you can measure from the center of one axle bolt hole to the center of the opposite side bolt hole. These measurements are as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e100mm 86.5mm or 3.4”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e108mm 93.97mm or 3.7”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e119mm 100.15mm or 3.94”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e123mm 104mm or 4.1”\u003c\/span\u003e\u003c\/p\u003e","brand":"B2BFAB","offers":[{"title":"Mk7 | Mk6 | Mk5 60mm bolts","offer_id":41620541964324,"sku":"B2BFAB-AS-108","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Mk4 30mm bolts","offer_id":41620541997092,"sku":"B2BFAB-AS-108-30MM","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0247\/4986\/7044\/files\/B2BFAB-AS-108-2.jpg?v=1750267087","url":"https:\/\/www.b2bfab.com\/de\/products\/b2bfab-axle-spacer-kit-for-mk4-5-6-7-w-108mm-axles","provider":"B2BFAB","version":"1.0","type":"link"}