Marker
B2BFAB Skoda Kodiaq/Seat Tarraco Camber Correcting Lift Kit
B2BFAB Skoda Kodiaq/Seat Tarraco Camber Correcting Lift Kit
B2BFAB Skoda Kodiaq/Seat Tarraco Camber Correcting Lift Kit
B2BFAB Skoda Kodiaq/Seat Tarraco Camber Correcting Lift Kit

B2BFAB Skoda Kodiaq/Seat Tarraco Camber Correcting Lift Kit

Prix normal
$399.50
Prix normal
Prix réduit
$399.50
Prix unitaire
par 
Disponibilité
Épuisé
Frais d'expédition calculés lors du passage à la caisse.

Just facts - The B2BFAB Camber Correcting Lift Kit is the only kit on the market for your Skoda Kodiaq/Seat Tarraco that provides the 1.5" lift you want without sacrificing handling or proper alignment specifications!


The Overview: The owners of B2BFAB developed the first lift kit in 2016 for the MQB platform (MQB = shared chassis for Atlas, Tiguan, Alltrack, Taos, Golf, Jetta, Audi A3, Q3, and more). The initial kit was a simple bolt through design and resulted in less than ideal alignment specs, which made for less than ideal handling and tire wear. Both were issues that needed to be addressed. Over the next five years, we tested numerous prototypes and worked to perfect a design that checked all of the boxes. We are proud to introduce the B2BFAB MQB Camber Correcting Lift Kit!

The Problem: For the MQB platform and the majority of road-going vehicles, a small amount of negative camber is dialed into the front and rear suspension to offer proper cornering and overall handling. When a MQB platform vehicle is lifted with a bolt through lift kit or spring lift the negative camber of the front wheels is reduced or removed. With no camber adjustment present on the front suspension components, zero camber or even positive camber is unavoidable. 

"Why do I care?" The proper amount of negative camber ensures optimal contact between the tire and the road through all handling maneuvers. When front camber is outside of the manufacturer's specified range in the positive direction, the handling is floaty, twitchy, and generally unstable at highway speeds. While many vehicles have an adjustment for this, the front of the MQB platform does not.

The Solution: By offsetting the upper mounting point of the front struts, our lift kit removes the excessive positive camber allowing proper suspension geometry and specifications.

*Color Install instructions included.*

We STRONGLY SUGGEST replacing ALL one time use hardware during the install to ensure proper torque specs and avoid hardware failure. Full upgraded replacement hardware kit is available HERE.

For optimal rear shock travel we suggest our rear shock extender kit available HERE(Front shock extenders are not required as front shock travel is not affected with the install of our kit)

If you are looking to optimize your rear shock travel and increase load capacity our Atlas rear shock conversion is available HERE.

*Our lift kit is not recommended to combine with other lifting options

x